Skip to main content
Components | Solutions | Systems for:

Caramatic SafeDrive PLUS

Safety gas pressure automatic changeover system for the operation of two-cylinder systems in motor caravans and caravans while driving, for direct connection to the gas cylinder


consisting of: central and changeover regulator with mechanical crash sensor with pendulum and pressure gauge, medium pressure hose assemblies and regulator bracket

For more information, see the landing page for the Caramatic SafeDrive.

 

  • gas supply while driving using the integrated mechanical crash sensor with pendulum, which blocks the gas flow in case of an accident
  • Advantages crash sensor with pendulum:
    • faster and easier start-up and reset after response
    • more precise performance and therefore less interference from incorrect response behaviour
    • start-up possible with no problem, even if the leisure vehicle is in an inclined position
  • straightforward retrofitting, as no wall assembly of the regulators is required; the installation takes place directly on the gas cylinder
  • low space requirement for the installation in the gas cylinder case
  • gas cylinder can also stay open all the time while driving
  • increased safety, as in the event of an accident, the gas supply is stopped directly at the gas cylinder
  • automatic changeover to the gas cylinder on the reserve side as soon as the gas cylinder on the operating side is empty
  • the cylinder can be replaced without operational interruption
  • with pressure relief valve PRV
  • gas non-return valve: prevents the escape of gas when the cylinder is replaced
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 lh nut x G 3/8 lh nut x 450 mm to connect the two regulators
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 lh nut x compr. fit. 10 x 450 mm
  • suitable for connection of the remote display Caramatic BasicControl
  • by default, the version with compression fitting 10 / 8 at the outlet is fitted with an adapter to connect 8 mm piping
  • brackets for safe holding of the regulator on the wall, e.g. when replacing the gas cylinder

  • maximum permissible pressure: PS 16 bar
  • connections: outlet: central regulator: G 1/4 lh M
    changeover regulator: G 3/8 lh M
  • outlet pressure: central regulator: 30 or 50 mbar
    changeover regulator: 150 mbar

  • Caramatic SafeDrive PLUS cannot be used with adapter for the gas cylinder with clip-on connector.

You will find the assembly and operating manuals for this product in the article list below by clicking on this symbol.
Filter

Connection A
Connection B
Outlet pressure
Flow rate
Country of destination
Packaging
Part no.
KLF
compr. fit. 10 / 8
30 mbar
1.5 kg/h
DE / AT / PL
7184312
Brit.POL
compr. fit. 10 / 8
30 mbar
1.5 kg/h
GB propane
7184307
EU-Shell
compr. fit. 10 / 8
30 mbar
1.5 kg/h
GB butane
7184308
Ital.A
compr. fit. 10 / 8
30 mbar
1.5 kg/h
IT / GR / CY
7184301
POL-WF
compr. fit. 10 / 8
30 mbar
1.5 kg/h
SE
7184310
Shell-F
compr. fit. 10 / 8
30 mbar
1.5 kg/h
CH / BE
7184302
Komb.Shell-H
compr. fit. 10 / 8
30 mbar
1.5 kg/h
NL / RU
7184313
Shell
compr. fit. 10 / 8
30 mbar
1.5 kg/h
SI / CZ / HR / SK / RS
7184316
KLF
compr. fit. 10 / 8
50 mbar
1.5 kg/h
DE / AT / PL
7184512

Article name
Packaging
Part no.
Medium pressure hose assembly G 1/4 lh nut x compr. fit 10 x 450 mm 
0440916
Medium pressure hose assembly G 3/8 lh nut x G 3/8 lh nut x 450 mm
0450511

Article name
Packaging
Part no.
Fitting pipe socket 10 x compr. fit. 8
6722300

Article name
Packaging
Part no.
Caramatic BasicControl - Remote display for Caramatic BasicTwo two-cylinder system or Caramatic SafeDrive PLUS
7139200