Skip to main content
Components | Solutions | Systems for:

SmartBox MINI

is a battery-operated, electronic remote level gauge for a non-pressurised tank with a liquid operating medium


consisting of: digital display unit with 16-digit LC display and mechanical level gauge type FSA-E with 10 m cable

operating media:
waste oil, diesel, FAME, urea solution (AdBlue), fuel oil, fuel oil bio, HVO, vegetable oil, rainwater and other water-endangering, non-flammable liquids

function:
The content of the tank is determined by measuring the filling height on the basis of the float principle. With the use of an electronic interface, the filling level signal is transferred via a cable which can be extended to up to 50 m to the SmartBox MINI digital display unit, where it is converted into the set output value and shown on the display.

Alternating from the tank content, the free capacity volume is shown on the display. This is the filling volume which fits in the tank during the impending filling process. This can be read easily by the tank truck driver and does not require a laborious calculation.

By touching the sensor on the digital display unit, depending on the individual settings, the tank content is reported in litres, percentage by volume or as the filling height in centimetres for a few seconds.

Independently of this, the tank content, expressed as the filling height in centimetres, can also be read at all times on the scale of the mechanical level gauge type FSA-E.

  • CE marking according to EMC and RoHS

  • accuracy of the digital display unit: ± 2% of the end value of the measurement range
  • supply voltage: 3 batteries type AA (included)
  • protection type: IP30
  • diameter float type FSA-E:
    • measurement range 0 to 160 cm: 31 mm
    • measurement range 0 to 250 cm: 38 mm
  • connection tank: G 1 1/2 M

  • The mechanical level gauge type FSA-E with the measurement range 0 to 160 cm is suitable for non-pressurised tanks up to a filling height of 150 cm.
  • The mechanical level gauge type FSA-E with the measurement range 0 to 250 cm is suitable for non-pressurised tanks up to a filling height of 240 cm.
Filter

Article name
Packaging
Part no.
measurement range type FSA-E 0 to 250 cm, filling height tank 0 to 240 cm
1590004

Article name
Packaging
Part no.
Mechanical level gauge type FSA-E for measurement range 0 to 160 cm
2890022
Mechanical level gauge type FSA-E for measurement range 0 to 250 cm
1590024
Mechanical level gauge type FSA-E for measurement range 0 to 250 cm
2890024
Sensor assembly with 10 m cable
2890029

Article name
Packaging
Part no.
Reducer for tank connection plastic G 2 M x G 1 1/2 F, material: PA
1528920