Regulator-hose assembly set

for connection to gas cylinders, for the operation of gas barbecues with a gas cartridge connection

consisting of: medium pressure regulator type M50-F/SBS, 2.0 bar, 2 kg/h with 35° outlet and integrated excess flow valve (EFV) with manual opening,
medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 lh nut x quick coupler SKU-QR,
adapter plug-in fitting STN

excess flow device prevents gas escape in case of damage or if the hose assembly becomes detached, and blocks the gas flow, as soon as the nominal flow rate is exceeded by 10%
adapter with plug-in fitting STN on one side for easy disconnection of the hose assembly
a special device makes the SKU-QR quick coupler tamperproof – decoupling is only possible with the standardised STN plug-in fitting
the gas flow is shut off when decoupling
the ergonomic and non-slip handle makes the SKU-QR quick coupler easy to hold in the hand and enables easy coupling and/or decoupling
the sealing plug prevents the penetration of dirt particles or insects when the SKU-QR quick coupler is not in use

single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate GGV

The gas equipment must have a low pressure regulator for gas cartridges with a connecting thread 7/16-28 UNEF F according to EN 417, 1-20 UNEF F or GAZ.
The SKU-QR quick coupler does not serve as a permanant shutt-off device, but must always be used in connection with a shut-off valve (e.g. the cylinder valve).