Skip to main content
Components | Solutions | Systems for:

Caramatic SafeDrive

safety gas pressure regulation device for the operation of single-cylinder systems in motor caravans and caravans while driving, for direct connection to the gas cylinder


consisting of: mechanical crash sensor new with pendulum, low pressure regulator with over-pressure safety device S2SR, medium pressure hose assembly and regulator bracket

  • gas supply while driving using the integrated mechanical crash sensor new with pendulum, which blocks the gas flow in case of an accident
  • Advantages crash sensor new with pendulum:
    • faster and easier start-up and reset after response
    • more precise performance and therefore less interference from incorrect response behaviour
    • start-up possible with no problem, even if the leisure vehicle is in an inclined position
  • straightforward retrofitting, as no wall assembly of the regulator is required; the installation takes place directly on the gas cylinder
  • low space requirement for the installation in the gas cylinder case
  • gas cylinder can also stay open all the time while driving
  • increased safety, as in the event of an accident, the gas supply is stopped directly at the gas cylinder
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 lh nut x compr. fit. 10 x 450 mm
  • by default, the version with compression fitting 10 / 8 at the outlet is fitted with an adapter to connect 8 mm piping
  • brackets for safe holding of the regulator on the wall, e.g. when replacing the gas cylinder

  • single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate PED

  • maximum permissible pressure: PS 16 bar

  • Caramatic SafeDrive cannot be used with adapter for the gas cylinder with clip-on connector.
You will find the assembly and operating manuals for this product in the article list below by clicking on this symbol.
Filter

Connection A
Connection B
Outlet pressure
Flow rate
Country of destination
Packaging
Part no.
KLF
compr. fit. 10 / 8
30 mbar
1.5 kg/h
DE / AT / PL
7183312
Brit.POL
compr. fit. 10 / 8
30 mbar
1.5 kg/h
GB propane
7183307
EU-Shell
compr. fit. 10 / 8
30 mbar
1.5 kg/h
GB butane
7183308
Ital.A
compr. fit. 10 / 8
30 mbar
1.5 kg/h
IT / GR / CY
7183301
POL-WF
compr. fit. 10 / 8
30 mbar
1.5 kg/h
SE
7183310
Shell-F
compr. fit. 10 / 8
30 mbar
1.5 kg/h
CH / BE
7183302
Komb.Shell-H
compr. fit. 10 / 8
30 mbar
1.5 kg/h
NL / RU
7183313
Shell
compr. fit. 10 / 8
30 mbar
1.5 kg/h
SI / CZ / HR / SK / RS
7183316
KLF
compr. fit. 10 / 8
50 mbar
1.5 kg/h
DE / AT / PL
7183512

Article name
Packaging
Part no.
Fitting pipe socket 10 x compr. fit. 8
6722300

More products in the line of detail-product-load-additional-products