Insulating separation connector type ITV
for the electrical isolation or galvanic separation of system parts, corresponds to the requirements to an insulator according to EN 12514-2 and E DIN EN 12514-3:2009
operating media:
- waste oil, fuel oil, heavy fuel oil
- version with FKM O-ring: BTL, diesel, FAME, fuel oil bio and vegetable oil
- for the electrical isolation of underground tanks with cathodic corrosion protection and grounded system parts
- for the galvanic separation with different pipe materials for the avoidance of contact corrosion
- resistance against exposure to flames according to EN 60335-1 and EN 60695-2-11
- DOC according to MVV TB [administrative regulation on technical construction requirements] C 2.15.23: EN 12514-2
- maximum permissible pressure: PS 16 bar
- material: Steel, PA 6 or PA 6-GF50
For the correct selection and assembly of compression fittings, please refer to the GOK assembly manual and the data sheets for compression fittings and screw-in connectors (at www.gok.de/en/Download-center/Technical-documentation/Data-sheets or www.gok.de/en/Download-center/Technical-documentation/Installation-instructions).
If you are installing a compression fitting with copper or aluminium pipe, you must use a reinforcement ring. For aluminium pipes, use a reinforcement ring made of steel!
All compression fittings with DVGW type approval certificate according to DIN 3387-1. The DIN 3387-1 standard specifies the requirements and tests for compression fittings (smooth pipe couplings) for connecting metal gas pipes, e.g. within the field of application of TRF (Technical Rules for LPG in Germany). The details of the design of compression fittings are mainly specified in EN ISO 8434-1, DIN 2353 or other standards. For a precise description, the standardised designations according to EN ISO 8434 are used (e.g. EN ISO 8434-1 - SC).
If you are installing a compression fitting with copper or aluminium pipe, you must use a reinforcement ring. For aluminium pipes, use a reinforcement ring made of steel!
All compression fittings with DVGW type approval certificate according to DIN 3387-1. The DIN 3387-1 standard specifies the requirements and tests for compression fittings (smooth pipe couplings) for connecting metal gas pipes, e.g. within the field of application of TRF (Technical Rules for LPG in Germany). The details of the design of compression fittings are mainly specified in EN ISO 8434-1, DIN 2353 or other standards. For a precise description, the standardised designations according to EN ISO 8434 are used (e.g. EN ISO 8434-1 - SC).
Filter
Connection A
Connection B
Packaging
Part no.
Connection A
Connection B
Packaging
Part no.
Connection A
Connection B
Packaging
Part no.
Connection A
Connection B
Packaging
Part no.
More products in the line of detail-product-load-additional-products
