Skip to main content
Components | Solutions | Systems for:

Caramatic SafeDrive PLUS

Safety gas pressure automatic changeover system for the operation of two-cylinder systems in motor caravans and caravans while driving, for direct connection to the gas cylinder


consisting of: central and changeover regulator with mechanical crash sensor new with pendulum and pressure gauge, medium pressure hose assemblies and regulator bracket

  • gas supply while driving using the integrated mechanical crash sensor new with pendulum, which blocks the gas flow in case of an accident
  • Advantages crash sensor new with pendulum:
    • faster and easier start-up and reset after response
    • more precise performance and therefore less interference from incorrect response behaviour
    • start-up possible with no problem, even if the leisure vehicle is in an inclined position
  • straightforward retrofitting, as no wall assembly of the regulators is required; the installation takes place directly on the gas cylinder
  • low space requirement for the installation in the gas cylinder case
  • gas cylinder can also stay open all the time while driving
  • increased safety, as in the event of an accident, the gas supply is stopped directly at the gas cylinder
  • automatic changeover to the gas cylinder on the reserve side as soon as the gas cylinder on the operating side is empty
  • the cylinder can be replaced without operational interruption
  • with pressure relief valve PRV
  • gas non-return valve: prevents the escape of gas when the cylinder is replaced
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 3/8 lh nut x G 3/8 lh nut x 450 mm to connect the two regulators
  • medium pressure hose assembly (rubber with textile lining; cold resistant up to -30 °C; hose dimensions 6.3 x 3.5 mm) G 1/4 lh nut x compr. fit. 10 x 450 mm
  • suitable for connection of the remote display Caramatic BasicControl
  • by default, the version with compression fitting 10 / 8 at the outlet is fitted with an adapter to connect 8 mm piping
  • brackets for safe holding of the regulator on the wall, e.g. when replacing the gas cylinder

  • single fittings with DIN-DVGW and/or DVGW [German Association of Gas and Water] type test certificate or EU type examination certificate PED

  • maximum permissible pressure: PS 16 bar
  • connections: outlet: central regulator: G 1/4 lh M
    changeover regulator: G 3/8 lh M
  • outlet pressure: central regulator: 30 or 50 mbar
    changeover regulator: 150 mbar

  • Caramatic SafeDrive PLUS cannot be used with adapter for the gas cylinder with clip-on connector.
Filter

Connection A
Connection B
Outlet pressure
Flow rate
Country of destination
Packaging
Part no.
KLF
compr. fit. 10 / 8
30 mbar
1.5 kg/h
DE / AT / PL
7184312
Brit.POL
compr. fit. 10 / 8
30 mbar
1.5 kg/h
GB propane
7184307
EU-Shell
compr. fit. 10 / 8
30 mbar
1.5 kg/h
GB butane
7184308
Ital.A
compr. fit. 10 / 8
30 mbar
1.5 kg/h
IT / GR / CY
7184301
POL-WF
compr. fit. 10 / 8
30 mbar
1.5 kg/h
SE
7184310
Shell-F
compr. fit. 10 / 8
30 mbar
1.5 kg/h
CH / BE
7184302
Komb.Shell-H
compr. fit. 10 / 8
30 mbar
1.5 kg/h
NL / RU
7184313
Shell
compr. fit. 10 / 8
30 mbar
1.5 kg/h
SI / CZ / HR / SK / RS
7184316
KLF
compr. fit. 10 / 8
50 mbar
1.5 kg/h
DE / AT / PL
7184512

Article name
Packaging
Part no.
Fitting pipe socket 10 x compr. fit. 8
6722300

Article name
Packaging
Part no.
Caramatic BasicControl - Remote display for Caramatic BasicTwo two-cylinder system or Caramatic SafeDrive PLUS
7139200

More products in the line of detail-product-load-additional-products